| Name |
Description |
PDF |
| W1.00 |
Meter Box Placement |
W1.00 (PDF) |
| W1.00.1 |
Typical Service Conduit Installation |
W1.00.1 (PDF) |
| W1.00.2 |
Typical Service Tap Locations – Ductile Iron Pipe |
W1.00.2 (PDF) |
| W1.02 |
1-inch x 3/4 inch Meter Installation (Existing Service) |
W1.02 (PDF) |
| W1.02.1 |
1-inch x 3/4 inch Meter Installation (No Existing Service) |
W1.02.1 (PDF) |
| W1.02.2 |
1-inch Angle Meter Valve Installation (No Meter Set) |
W1.02.2 (PDF) |
| W1.03 |
1-inch Meter Installation (Existing Service) |
W1.03 (PDF) |
| W1.03.1 |
1-inch Meter Installation (No Existing Service) |
W1.03.1 (PDF) |
| W1.04 |
2-inch x 3/4 inch Meter Installation |
W1.04 (PDF) |
| W1.05 |
2-inch x 1 inch Meter Installation |
W1.05 (PDF) |
| W1.06 |
2-inch x 1 – 1/2 inch Meter Installation |
W1.06 (PDF) |
| W1.07 |
2 inch Meter Installation |
W1.07 (PDF) |
| W1.08 |
Multiplex Water Metering Sequence |
W1.08 (PDF) |
| W1.09 |
2-inch Flush Point Dead End Installation – 2 inch Water Main |
W1.09 (PDF) |
| W1.10 |
2-inch Flush Point Looped Installation – 2 inch Water Main |
W1.10 (PDF) |
| W1.11 |
Flush Point Water Mains 4 inch to 10 inch – Dead End Installations |
W1.11 (PDF) |
| W.1.11.1 |
Flush Point (Internal) Water Mains 4 inch to 10 inch Dead End Installation |
W1.11.1 (PDF) |
| W1.12 |
Flush Point Water Mains 4 inch to 10 inch – Tee Installations |
W1.12 (PDF) |
| W1.13 |
Typical Land Division Water Main Alignment |
W1.13 (PDF) |
| W1.13.1 |
Typical Joint Trench Detail |
W1.13.1 (PDF) |
| W1.14 |
Fire Hydrant Installation |
W1.14 (PDF) |
| W1.15 |
Bollard Installation |
W1.15 (PDF) |
| W1.16 |
Valve Tile Installation and Wire Splice Detail |
W1.16 (PDF) |
| W1.16.1 |
Valve Lid and Meter Box Concrete Collars |
W1.16.1 (PDF) |
| W1.17 |
Typical Trench Sections |
W1.17 (PDF) |
| W1.17.1 |
Typical Trench Compaction Zones |
W1.17.1 (PDF) |
| W1.18 |
Valve Operating Nut Extension |
W1.18 (PDF) |
| W1.19 |
Wellhead Protection Sign |
W1.19 (PDF) |
| W1.20 |
1 inch and 2 inch Air Valve Installation |
W1.20 (PDF) |
| W1.21 |
1 inch Auto flush Installation |
W1.21 (PDF) |
| W1.22 |
Cathodic Protection For Locate Wire |
W1.22 (PDF) |
| W1.22.1 |
Cathodic Protection Couplings and Joints |
W1.22.1 (PDF) |
| W1.22.2 |
Cathodic Protection Exothermic Weld & Cap |
W1.22.2 (PDF) |
| W1.22.3 |
Cathodic Protection Test Station |
W1.22.3 (PDF) |
| W1.23 |
New Water Line Under Existing Sewer |
W1.23 (PDF) |
| W1.23.1 |
Water Line Installation Over Sewer |
W1.23.1 (PDF) |
| W1.24 |
Water Under Existing Storm Drain |
W1.24 (PDF) |
| W1.25 |
Casing Installation |
W1.25 (PDF) |
| W1.26 |
Thrust Block Installation |
W1.26 (PDF) |
| W1.27 |
Spare Casing Detail |
W1.27 (PDF) |
| W1.28 |
Water Sample Station Standard Installation |
W1.28 (PDF) |
| W1.29 |
Connection to Existing Main – Land Division |
W1.29 (PDF) |
