TRUCK SERVICE BODY
Bid Number: 2010-01
Bid Due: 02/25/2010
Status: Closed
Description:
· Wheel base is 154”
1. Truck engine is Maxx Force DT 260HP
2. Allison Transmission 3500RDS- P
3. Body builders pack with switch pack installed `already
4. All hose reels are spring retract (5/8” hose for water, ½” & 3/8” air hose and ½” welded hose for hydraulic)
5. PTO is operated by Hot Shift on dash- On when activated
6. 14 gauge on electrical power cord reel with standard electrical cord ends
7. 5/8” or ¾” heater hose acceptable for bin heater supply and return
8. Hydraulic tank can be stand alone with sufficient capacity determined by required GPM requirements and
rotary screw air compressor manufacturer
9. Front two inch receiver tube is for tool carrier only 350lbs max
10. Option #5 crane should include reinforcement to bin pack
11. Item #8 hitch - We can provide photos of a current one in use (builder to design and fabricate for our needs).
Bid Questions Contact: Cam Hanes
Bid Questions Email: camh@subutil.com
Notes:
BID RESULTS
Pending Board Approval
| Truck Body | ||||||
| Bid # 2010-01 | ||||||
| Oregon Metalcraft | PTC | ABC | PMI | Carco | Altec | |
| Truck Body | $ 35,047.00 | $ 36,480.00 | $ 38,628.00 | $ 38,305.00 | $ 41,891.00 | $ 53,908.00 |
| Optional Equipment #2 PTO Pump | $ 1,688.00 | $ 6,061.00 | $ 6,129.00 | $ 6,688.00 | $ 12,335.00 | $ 5,654.65 |
| Optional Equipment # Rotary Screw | $ 6,670.00 | $ 6,860.00 | $ 7,724.00 | $ 6,871.00 | $ 6,643.00 | $ 7,057.00 |
| Optional Equipment #6 Hyd. Lifter | Elc./hyd. Lift N/A | $ 1,875.00 | N/A | $ 3,155.00 | $ 1,114.00 | No price |
| Total--------------------------->> | $ 43,405.00 | $ 51,276.00 | $ 52,481.00 | $ 55,019.00 | $ 61,983.00 | $ 66,619.65 |
| Late Bid |
Documents:
Bidding Document
Amendment
- Addendum 1.pdf
- See note Bid B4 and B5.jpg
- See note Bid B43 and B3.jpg
- See note Bid B8 and B6.jpg
- See note Bid B39.jpg
Data Sheet